4
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
WorkUp
®
Adjustable Table - Model HF
Assembly Instructions
4
Wire Trough (optional)
Note:
The wire trough is an optional
accessory that must be ordered
separately. If no wire trough is
specified, go now to page 5.
1. An optional wire trough may mount
to the underside of the tabletop,
centered over the tabletop supports
of any depth table, as illustrated in
Detail C. If the wire trough is not
center-mounted over the tabletop
supports, the tabletop depth
determines the mounting location.
If the wire trough is to be mounted
under tabletops of 22” or 24” in
depth, see Figure 5. If the wire trough
is to be mounted under tops of 30”
or 36” in depth, see Detail B.
2. Align the wire trough mounting
holes to the appropriate holes in the
tabletop. Using six #10 x
5
/
8
”
pan head screws, secure the wire
trough to the tabletop as illustrated
(Figure 5, Details B or C).
tabletop
control
box
tabletop
support
Figure 5 - 22” or 24” Tabletop Depth
wire trough
(optional)
#10 x / ”
pan head
screw
5
8
Detail B - 30” or 36” Tabletop Depth
tabletop
support
tabletop
wire
trough
Detail C - 22”, 24”, 30” or 36” Tabletop Depth
tabletop
support
tabletop
wire
trough
