3
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
WorkUp
®
Adjustable Table - Model CR
Assembly Instructions
tabletop
crank
assembly
#12 x 1”
screws
Figure 4
hex
bushing
column
Crank Installation
Note:
The crank can be installed on
either (left or right) side of table.
1. Slide the hex rod of the Crank
Assembly into the hex bushing on
one of the columns (Figure 4).
2. Attach the Crank assembly using four
#12 x 1” tapping screws (Figure 4).
Note:
If the crank handle binds when
moved in and out, slightly loosen the
four attachment screws, reposition
the mount housing until the handle
does not bind, and re-tighten the
screws.
