3
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Uniframe
®
Tables - Latch Removal & Installation
Assembly Instructions
11. Re-install the slot plug (removed in
step 4) by snapping it into the slot
of the apron (Figure 12).
12. At the latch rod handle near the slot
plug, re-install the rubber cap from
the latch rod using your finger tips
(Figure 13).
13. Inspect the table latch for proper
function. Table latch should strike
the catch along the angled plane
of the latch, resulting in the latch
lifting upward until the latch slot
falls over the catch. If the latch
strikes the catch either high or low,
adjustments will need to be made
with the set screws located at the
other end of the latch (Figure 14).
Figure 12
latch
rod
slot
plug
apron
Figure 13
latch
rod
rubber
cap
slot
plug
table
latch
Figure 14
table
latch
table
catch
