2
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Uniframe
®
Tables - Latch Removal & Installation
Assembly Instructions
6. With the clevis pin removed from
the table latch and leg brackets,
move the latch to the left of the leg
brackets away from the apron slot
and push the latch rod through the
apron slot in the frame (Figure 6).
7. Slide the table latch off the latch rod
(Figure 7).
8. Slide the new table latch onto the
latch rod, making sure the hook is
pointed down and away from the
table. Slide new table latch until it
rests on the “U” section of the latch
rod as illustrated in figure 8.
9. To allow the latch rod to rest inside
the frame, move the table latch to
the left side of the brackets away
from the apron slot (Figure 9).
10. Move table latch between the
leg brackets (Figure 10). Align
the holes in the table latch with
the holes in the leg brackets and
insert a 2
1
/
2
” clevis pin through the
brackets and latch. Once the clevis
pin is in place, use a hammer and
punch to tap a
5
/
32
” roll pin into the
clevis pin until it is approximately
halfway through the clevis pin
(Figure 11).
Figure 6
table latch
latch rod
leg
bracket
apron
slot
Figure 7
table
latch
latch rod
latch
hook
Figure 8
table latch
latch
rod
Figure 9
table
latch
latch rod
leg
bracket
apron
slot
Figure 10
latch
rod
leg
bracket
table
latch
align table
latch & leg
bracket
holes
Figure 11
hammer
5
/
roll pin
32
”
2 / ”
1
2
clevis pin
5
/ ” roll pin
32
5
/ pin punch
32
”
