Knockdown Frameworks, Inc. warrants all of its products for five years against any defects that are due to faulty materials or workmanship. We will promptly correct such
defects by repair or replacement, at our option, without charge. This warranty covers product defects only and will expire five years after date of purchase by the original
consumer purchaser,with proof of purchase required.
This warranty does not apply to damage caused by and resulting from misuse, neglect, accident, or improper operation, maintenance, storage, transportation, or handling
of the product. This warranty is for the original consumer purchaser for residential use only and does not apply if the product is used in any commercial application (such as
rental property). This warranty does not cover any incidental or consequential damages. If you feel that you have a claim under this warranty, please contact the store from
which it was purchased. If this is not possible,call 706-543-9397 for advice on handling your claim.
Instructions for
Nomad 2
XL-Twin
Manufactured by
A-80 BED RAIL (4) - 80”
A-17 REGULAR SLAT (20) - 17”
A-17-C CONNECTOR SLAT (4) - 17”
H A R D W A R E L I S T
1
H-10 HEX WRENCH
H-3 CROSS DOWEL
24
24
H-21 2 - 1/2” BOLT
Parts:
394 Dairy Pak Rd. • Athens, GA 30607
kdframes.com • [email protected]
sku# 2364-N2-XT
A-34F BED ENDS (2) - 34”
Tool needed:
#2 Phillips screw driver
Align a Left Leg (A-15L) and Right Leg (A-15R)
so that the rail pockets are on the front.
Turn the Bed End (A-34F) so that the
pocket holes are facing the front.
Then push the dowels into the holes on the
legs. Repeat for the other Bed End.
WOOD SCREWS
GO IN THESE
POCKET HOLES
Use a phillips screw driver to attach
the Legs to the Leg Connector using
(4) 1 - 1/2” Wood Screws (H-20).
Repeat for the other Bed End.
1
RAIL POCKETS MUST
ALL BE ON THE
SAME SIDE
A-15L
A-15R
THESE POCKETS
SHOULD BE TOWARDS
THE TOP
H-20 1 - 1/2” WOOD SCREW
8
A-15L LEFT LEG (2)
A-15R RIGHT LEG (2)
