When the backrest has been pushed all the way onto the frame’s back tube, rotate the
clips towards the center of the chair. Rotate the clip marked L clockwise and the clip
marked R counterclockwise. The clips will not rotate if the backrest is not pushed all the
way down onto the back frame tubes. You may need a channel locks and rag to help you.
Place the seat shroud on the bottom of the chair assembly. Using a Phillips screwdriver
bit, replace the four screws to hold the seat and seat shroud to the frame.
Replace Four
Screws to Hold
Seat and Seat
Shroud onto Frame
The backrest must
be pushed all the
way down onto the
back tubes on the
frame for the clips
to rotate.