Rapture No Arm Frame Replacement Instructions
Turn the chair upside down and place the seat on the corner of a table. Use a Phillips
screwdriver bit to remove the four screws in the seat shroud. Remove the seat shroud
from the chair assembly. Turn chair over to the upright position.
There are two no arm backrest clips locate in the backrest. If you were sitting in the
chair, rotate the clip to the right clockwise and the clip to the left counterclockwise. Pull
the backrest up away from the chair assembly. The clips may fall out when the back of
the chair is coming off the frame.
Remove Screws
from Seat Shroud
Location of
Chair Back
Clips
