Remove the seat by grabbing the front end of the seat and pulling up away from the
frame. Scrap or return the old frame. Place the new frame on a solid level surface to re-
assemble.
Place the seat on the new frame, and push seat in position. Slide the backrest down onto
the frame until the frame tubing comes up to the bottom of the clip cutout positions on
the backrest. Put the clips into the backrest cutout. The clips are marked with an R and
an L to assist you with what side they are placed. If you were sitting in the chair, the clip
marked with an R goes to the right side and the clip marked with an L goes to the left
side. Place the clips in their position with the R and L marks facing out towards you.
Slide the backrest and clips down onto the frame.
Clip Positions
Push the backrest
down when clips is
in position