Ki Mobility Clik, Инструкция пользователя и гарантия

Страница: 32 / 80

31
IV. WHEELCHAIR USE & CONFIGURATION
U. Dynamic 5th Wheel
When adjusting the 5th wheel, consider the environmental obstacles that may be encountered. If
the 5th wheel caster touches the ground, it is possible that the large rear wheels might not touch
the ground. Always ensure enough clearance between the ground and the 5th wheel caster.
How to Use the Standard 5th Wheel
1. Inserting and Removing the Standard 5th Wheel
a. To remove, pull the release knob (Fig. 22:A) to disengage the locking pin and slide the
assembly out of the tubular receiver (Fig. 22:B).
b. To insert the assembly, pull the release knob (Fig. 22:A) and insert the assembly into the
tubular receiver (Fig. 22:B).
c. Rotate the assembly in the receiver to align the slot (Fig. 22:C) and the cross pin (Fig.
22:D).
d. Release the knob (Fig. 22:A).
2. Adjusting the Position from the Floor
a. The caster stem is adjustable within the Dynamic 5th wheel arm.
b. Loosen the 6mm bolt in the clamping ring (Fig. 23:A).
c. Grasp the caster fork assembly and move up or down to the desired position. Take care to
not rotate the caster stem within the housing while repositioning.
d. Retighten the 6mm bolt in the clamping ring (Fig. 23:A).
A
B
C
D
Fig. 22
A
Fig. 23