Ki Mobility Clik, Инструкция пользователя и гарантия

Страница: 24 / 80

23
IV. WHEELCHAIR USE & CONFIGURATION
N. High Mount Angle Adjustable Flip Under Footrest
How to Use Your Footrest
1. Adjusting the Angle
a. Loosen, but do not remove, the two 6mm screws on the center clamp.
b. Once loose, the clamp will rotate around the footrest extension tube. Adjust the clamp into
the desired position.
c. Retighten the two 6mm screws to 80 in./lbs to secure.
2. Changing the Footplate Position
a. Remove both M6 screws (Fig. 10:A) from the footplate. Catch the nuts that may drop from
the underside of the clamp.
b. Relocate the footplate and insert the screws into the appropriate holes.
c. Fit the nuts into the slot underneath the clamp and tighten the screws to secure.
3. Changing the Height of the Footplate
a. Slightly loosen both the 6mm screws (Fig. 10:B) from the footplate clamp. Keep the clamp
snug so the assembly holds together and repeat on the opposite side.
b. The entire footplate assembly can now slide up or down along the frame. Move the foot -
plate to the desired position.
c. Tighten one of the 6mm screws (Fig. 10:B) slightly on each side. Once secure, finish tight -
ening the four 6mm screws (Fig. 10:B). Tighten each screw a little at a time to prevent the
clamp from clamping down unevenly.
NOTE: Tightening the screws unevenly may result in damage to the threads inside the
clamp.
A
B
Fig. 10