A] Product Installation
Caution
:
Make sure that the power cord plug and socket are de-energized when opening or
assembling the vacuum cleaner that you purchased.
1. Make sure the power cord is disconnected from the socket.
（
Fig 1
）
2. Loose Clips.
（
Fig2
）
3. Raise the top cover from the dust barrel. (Fig 3)
4. Take out all the accessories from the dust barrel. (Fig 4)
5. Place the top cover on the dust barrel that already has a filter assembly and lock it with both sides
of the clips. (Fig 5)
6. Align the hose assembly port with the suction inlet and insert it into right and tighten it. (Fig. 6)
6
EN
5
EN
Installation
Installation
Note: Make sure the remote control pairing is completed before start operating the vacuum for first
time
B] Remote control pairing setting
1. Make sure the power plug is connected to power supply socket.
（
Fig 1
）
2. Press the standby button and the panel's indicator light will be on. (Fig. 2)
3. At the same time press the suction button and cleaning button on the top cover, the indicator light will
be out. (Fig. 3)
4. Press one of the buttons on the remote control hose, the indicator light on the top cover panel will
flashes once to return to normal light, and the remote control pairing setting is complete. (Fig 4
）
7. Tighten the lid of the soap bucket to the right while inserting the water pump inlet on the top
cover. (Fig 7)
8. Insert the water inlet pipe into the water inlet of remote control hose and connect the aluminium
extension tube to the remote control hose.. (Fig 8)
9. Connect the two aluminum extension tubes as picture shows. (Fig 9)
10. Connect the aluminium extension tube with the brush that you need. For small and large water spray
head, you have to insert the water outlet pipe into the joint of aluminium extension tube. (Fig. 10)
Specifications
*Specifications are subject to change without prior notice.
Voltage
Power
Filtration Type
Tank Container Capacity
Power Cord Length
Vacuum Pressure
Noise Level
Net Weight
Product Dimension (LxWxH)
220-240V~ 50/60Hz
1200W
Cartridge Filter
20 L
5 Meter
17 kPa
82 dB
8.1kg
413 x 365 x 506mm
10
or
