6
Mars PRO Series NVR
A) Power LED
- This light will turn on when the power is turned on.
B) HDD LED
- This light will flash when the hard drive is working.
C) IR Sensor
- For receiving the infrared signal from the remote control.
D) USB
- Connect this to a USB mouse, flash disk, and other external storage
drive.
E) PoE
- This is where you connect the IP cameras. Integrated PoE (Power Over
Ethernet) ports provide power to cameras and video connection to NVR.
F) WAN
- Connect this to a network using the router or network switch. In addition
to connecting to a network, you can also access the local or remote ONVIF IP
cameras.
G) Line In
- For two-way audio input (Line Input).
H) Audio Out
- For connecting speakers.
I) e-SATA
- Connect this to an external hard drive to backup files stored on the
NVR.
J) VGA
- Connect this to your TV or a monitor with VGA input.
K) HDMI
- Connect this to your digital TV or monitor with HDMI input.
L) USB 3.0
- Connect this to a USB flash drive to backup recorded events.
M) Alarm and Sensor I/O block
- Connect to external Sensors and Alarm devices.
N) RS-485
- This is where you connect a speed dome camera via RS-485.
O) Power switch
- Press to turn the NVR on or off.
P) Power
- This is where you connect the power adapter (48V/2A, 4-Pin DIN
connector).
Product Overview
Network Video Recorder
32CH
A
B
D
C
Front View
LAN 4
LAN 2
LAN 3
LAN 1
LAN 8
LAN 6
LAN 7
LAN 5
LINE IN
AUDIO OUT
VGA
HDMI
USB 3.0
e-SATA
WAN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ALARM
SENSOR
G
1
2
3
4
G
5
6
7
8
RS485
48V
E
M
N
F
D
L
K
I
O
P
H
G
J
Rear View
Making the Connections
