SIEGENIA access control systems
Assembly instructions
IO module/IO module smart
05.2020
20/24
H39.ELEKS010EN-00
A
SI-Bus
Siemensstr
. 10
D-42551 V
elbert
A-OPENER 2.2
SN:
R1:
R2:
R3:
24V DC
GND
24V DC GND
Input
B C D
2 3 4
3 s
3 s
8x
♪
IO module
f
Hold.down.the.menu.button.
again for approx 3 seconds to
carry out the coupling.
f
An.acoustic.signal.on.the.drive.
sounds as acknowledgement.
f
The green status LED of the
module.flashes.and.an.acoustic.
signal sounds at intervals.
f
The status LED lights up green
and the menu status of the
module lights up magenta.
f
The devices are coupled.
11
Coupling IO module/IO module smart with SIEGENIA ACS
Both.devices.must.be.coupled.to.use.the.IO.module/IO.module.smart.in.conjunction.with.a.SIEGENIA.ACS.
f
The menu LED must light up
magenta.
f
If the menu LED on the IO mod-
ule does not light up magen-
ta,.press.the.button.briefly.to.
switch on the LED.
f
When the menu LED lights up
magenta,.press.the.button.a.few.
times.in.succession.until.the.LED.
lights up light red.
The.LEDs.switch.off.automatically.after.
approx. 2 minutes if no further input
on the IO module follows.
.
3 sec.
f
Hold.down.the.menu.button.3.
seconds to select the menu item
"Couple devices".
f
An.acoustic.signal.sounds.as.
acknowledgement.
f
The.LED.flashes.alternatively.
light red/white.
