5
/16
Operating instructions
Electro-mechanical systems
A-opener 2.2
5
/16
09.2019
H47.ELEKS011EN-00
2
Safety
•
All work on the 230 V AC mains power supply
must be carried out in compliance with the current
German VDE regulations (e.g., VDE 0100) and any
relevant country-specific requirements.
•
All-pole safety isolation should be used when rout
-
ing the network connection cable on-site.
•
Any modifications to the A-opener 2.2 are prohibit
-
ed.
•
Wiring the unit incorrectly can irreparably damage
its electronic components.
2.1
Structure of the warning notes
The warning notes in these instructions
•
when observed, provide protection against potential
personal injury and material damage,
•
classify the level of danger by the signal word,
•
designate the danger of personal injury via the
hazard sign,
•
define the type and source of danger,
•
show measures to prevent hazards and prohibit
specific behaviour.
The warning notes are set up according to the following
principle:
SIGNAL WORD
Type and source of danger
Explanation of the type and source of danger
•
Measures for the prevention of the danger
The hazard sign designates warning notices that warn
of personal injury.
The type and source of the hazard defines the cause of
the hazard. The potential consequences of non-obser
-
vation of warning notices are e.g. danger to life due to
electric shock.
Under measures, actions are listed that must be carried
out for the prevention of hazards or which are prohibit
-
ed for the prevention of a hazard.
2.2
Warning notes used
DANGER
The signal word "Danger" designates an immediately
threatening danger. If this hazard is not prevented, it
leads to death or severe injuries.
WARNING
The signal word "Warning" designates a potential
hazard. If this hazard is not prevented, it could lead to
death or severe injuries.
CAUTION
The signal word "Caution" designates a potentially
hazardous situation. If this hazardous situation is not
prevented, it could lead to minor or moderate injuries.
NOTICE
The signal word "Note" defines actions for the pre
-
vention of material damage. The observation of these
notes prevents damage to the components.
Information, advice etc.
This symbol indicates special features and designates
facts that require increased attention.
2.3
Warning notes
WARNING
Risk of fatal injury from electric shock and short circuit
Wrong connection of the A-opener
•
All-pole safety isolation should be used when routing
the network connection cable on-site.
•
All work on the 230 V AC mains power supply must be
carried out in compliance with the current German VDE
regulations (e.g., VDE 0100) and any relevant coun
-
try-specific requirements.
If energy-carrying cables are routed in parallel to data
cables (ISDN, DSL, etc.), this could lead to interference e.g.
in the speed of the data transmission.
Содержание SIEGENIA A-opener 2.2
Страница 2: ......
Страница 14: ...Electro mechanical systems Operating instructions A opener 2 2 09 2019 14 16 H47 ELEKS011EN 00 ...
Страница 15: ......
Страница 16: ...www siegenia com H47 ELEKS011EN 00 ...