background image

13/16

Operating instructions

Electro-mechanical systems

A-opener 2.2

13/16

09.2019

H47.ELEKS011EN-00

4.4 

Display of status LED

LED 

Buzzer

Description

Action

Comment

lights up green

Disturbance-free

Flashes green

Opening signal is present

Flashes yellow

Faulty contact of the connecting 

clamps

Check connecting clamps

If the fault persists

Contact service partner if the 

fault persists.

Lights up yellow

Limited function

Contact service partner if the 

fault persists.

Lights up red

Supply voltage defective

Check the supply voltage

If the fault persists

Contact service partner if the 

fault persists.

Operating voltage exceeded

Check the ambient temperature

Lights up red

Error in the control unit

Contact service partner if the 

fault persists.

Flashes red

Block drive with opening proce

-

dure

Check mechanical

sluggishness

If the fault persists

Contact service partner if the 

fault persists.

Check whether the main dead

-

bolt has been extended via the 

profile cylinder (child-proof lock 

active / lever handle blocked)

• 

To lock or unlock the door with the cylinder key, always turn it as far as it will go. The cylinder key must then be turned back some way before it 

can be removed from the cylinder lock.

• 

If the door is released automatically, it remains open for 3 s and an acoustic signal will be audible for this period.

• 

The multi-point lock with A-opener 2.2 will return to the locking position if the door is not opened during this period. The automatic multi-point 

locking system with A-opener 2.2 locks mechanically automatically if the door is closed.

• 

Opening the door via cylinder lock, lever handle, or horizontal actuating rod is only admissible during motor shutdown.

• 

If the multi-point lock has been locked via the profile cylinder, the main deadbolt is extended and the lever handle is therefore blocked (child-

proof lock). An electric opening process may not be carried out in this case.

Further information

You will find further information on the operation of the A-opener 2.2 (e.g. in conjunction with the SIEGENIA ac

-

cess control system) as well as all FAQs on the topic of „SIEGENIA Smarthome“ on the following SIEGENIA Internet 

page:

https://smarthome.siegenia.com

Содержание SIEGENIA A-opener 2.2

















Отзывы: