CARE AND MAINTENANCE
CARE AND MAINTENANCE
1) Be sure to unplug the unit before cleaning or servicing.
2) Do not use gasoline, thinner or other chemicals to clean
the unit.
3) Do not wash the unit directly under a tap or using a hose.
It may cause electrical danger.
4) If the power cord is damaged, it should be repaired by
manufacture or its agency.
IMPORTANT:
1. Air filter
2. Unit enclosure
-
Use a lint-free cloth soaked with neutral detergent to clean
the unit enclosure. Finished by a dry clean cloth.
Fig.23
3. Unit idle for a long time
14
-
Remove the rubber plug at the back of the unit and attach
a hose to drain outlet
(See Fig.20 & 21).
-
Remove the plug from the bottom drain outlet, all the water
in the bottom tray would drain out (See Fig.22).
-
Keep the appliance running on FAN mode for half a day in
a warm room to dry the appliance inside and prevent mold
forming.
-
Stop the appliance and unplug it, wrapped the cord and
bundle it with the tape(Fig.25). Remove the batteries from
the remote controller.
-
Clean the air filter and reinstall it.
. Place the open end of the hose
directly over the drain area in your basement floor
Fi g.24
Fig.25
Buckle
Power
cord
Upper filter
(take out)
R em ove the
screw ,then
t ake the lower
f ilter out.
Upper filter
(in stall)
Inst all t he lower
filte r by using
the screw.
-
Clean the air filter at least once every two weeks to prevent
inferior fan operation because of dust.
-
This unit has two filters. Take the upper filter out along the
the arrow direction (Fig.23),then take the filter down.
Remove the lower filter by loosening the screw, taking out
the filter as shown in Fig.23.
-
Wash the air filter by immersing it gently in warm water
(about 40 C/104 F) with a neutral detergent. Rinse the filter
and dry it in a shady place.
-
Install the upper air filter after cleaning , and install the lower
filter by using the screw (see Fig.24).
Removal
Cleaning
Mounting
O
O
Power plug
socket
Power plug
