6
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel and remote controller
and all its functions, then follow the s ymbol for the func tions you desire.
The unit can be controlled by the unit control panel alone or with the remote controller .
E LEC TRON IC CONTROL OPERATIN G IN STRUCTIO NS
Fig.3
NOTE: This manual does not include Remote Controller Operations, see t he <<Remote
Controller Instruction>> packed with the unit for details.
OPERATION PANEL OF THE AIR CONDITIONER
Used to initiate the SLEEP/ECO operation.
SLEEP/ECO button
Control the fan speed. Press to select the fan
speed in four steps-LOW, MED, HI and AUTO.
The fan speed indicator light illuminates under
different fan settings except AUTO speed. When
select AUTO fan speed, all the fan indicator lights
turn dark.
NOTE: Press this button for 3 seconds to initiate
ION feature.The ion generator is energized and will
help to remove pollen and impur ities from the air, and
trap them in the filter. Press it for 3 seconds again to
stop the ION feature.
FAN/ION button
(Opt ional)
(Optional)
(ION is Optional)
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
AUTO, COOL, DRY, FAN and HEAT(cooling
only models without). The mode indicator
light illuminates under the different mode
settings.
MODE select button
Power switch on/off.
POWER button
TIMER button
Used to initiate the AUTO ON start time and
AUTO OFF stop time program, in conjuction
with the
&
buttons. The timer on/off
indicator light illuminates under the timer
on/off settings.
+ -
SWING button
(Applicable to the models with auto swing feature only)
Used to initiate the Auto swing feature.
When the operation is ON , press the
SWING button can stop the louver at
the desi red angle.
(ION is optional)
Shows the set te mperature in
C
O
"
"
"
"
or
F and the Aut o-timer settings.
While on DRY and FAN modes, it shows
the room t emperature.
O
LED Display
NOTE:
On some models SLEEP button is instead of ECO button.
Used to adjust (increasing/decreasing)
temperature settings in1 C/2 F(or 1 F) increments
in a range of 17 C/62 F to 30 C/88 F (or 86 F)
or the TIMER setting in a range of 0~24hrs.
UP(
) and DOWN(
) button
NOTE:
The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.
+
-