Keysight U8030A Series, Руководство пользователя

Страница: 33 / 66

1 Introduction
32 Keysight U8030A Series User’s Guide
Output connections
Voltage drops
The load wires must be large enough to avoid excessive voltage drops due to the
impedance of the wires. In general, if the wires are heavy enough to carry the
maximum short circuit current without overheating, excessive voltage drops will
not be a problem. The voltage drops across the load wires should be limited to
less than 2 V. Refer to the American Wire Gauge (AWG) standard to calculate the
voltage drop for some commonly used AWG wire copper.
WARNING
Before attempting to connect wires to the front output terminals, make sure
to disable the power supply output first to avoid damage to the circuits
being connected.