manualshive.com logo in svg

Keysight P9370A, Руководство для стартапов

Поделиться
Скачать
Keysight P9370A Скачать руководство пользователя страница 32

 3-8                                                                                           Keysight Technologies Startup Guide

 

Safety and Regulatory Information
Regulatory Information

3-

To prevent electrical shock, disconnect the AC to DC adapter from 
the mains before cleaning. Use a dry cloth or one slightly dampened 
with water to clean the external case parts. Do not attempt to 
cleans internally.
When the is connected to the AC/DC adapter, position the adapter 

so the power cord is readily accessible. The power cord is the 

disconnecting device. It removes main power to the AC/DC adapter. 

The front panel switch is only for the DC power within the 

instrument, and not for the AC/DC adapter. Alternately, an AC 

switch or circuit breaker (which is readily identifiable and is easily 

reached by the operator) may be installed and used as a 

disconnecting device to remove mains power from the AC/DC 

adapter.

The AC/DC adapter has an auto–ranging line voltage input – be sure the 

supply voltage is within the specified range.

The AC/DC adapter is for indoor use only.

Never use a modified or damaged charger. Use the original AC–DC 

adapter ONLY.

The AC/DC adapter is designed for use in Installation Category II and 

Pollution Degree 2 per IEC 61010-1.

Содержание P9370A







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды