manualshive.com logo in svg

Keysight P9370A, Руководство для стартапов

Поделиться
Скачать
Keysight P9370A Скачать руководство пользователя страница 17

Keysight Technologies Startup Guide                                                                                            1-17

Getting Started
STEP 4. Install the P937xA Network Analyzers

Front Panel Features

Figure 1-10 

P937xA Front Panel

Feature

Description Refer to 

Figure 1-10 on page 17

.

Power LED

OFF: Power supply is disconnected

 

Amber: Power supply is on, but the power button is off.

 

Green: Power is on.

Status LED OFF: Power supply off. 

 

AMBER: Power supply on, but no firmware is not running.

 

GREEN: Power switch is on; Firmware is running; instrument is probably 

idle (not sweeping/trigger is in Hold).

 

FLASHING GREEN: A sweep or measurement has been triggered.

 

RED: Last sweep had an error.

Port 1

APC 3.5 mm female connector. Sources stimulus signals for the DUT and 

receives response signals from the DUT. Frequency range is determined by 

the network analyzer model.

Port 2

LO In

SMA female connector. If the network analyzer is not configured with 

another P937xA, the connector is terminated with a 50 ohm load. If the 

P937xA network analyzer is configured with another P937xA, the 

connector receives the LO signal from the configured P937xA network 

analyzer.

LO Out

SMA female connector. If the network analyzer is not configured with 

another P937xA, the connector is terminated with a 50 ohm load. If the 

P937xA network analyzer is configured with another P937xA, the 

connector provides the LO signal to the configured P937xA network 

analyzer.

Ref In

SMB male connector. A 10 MHz external reference signal supplied to this 

port can be used as the instrument frequency reference instead of the 

internal frequency reference. To activate this feature on the soft front panel, 

select 

Utility

 > 

System

 > 

Configure

 > 

External Reference

.

Ref Out

SMB male connector. Outputs a 10 MHz frequency reference signal for use 

by other test equipment.

Trig In

SMB male connector. Inputs a signal to trigger the network analyzer 

P937xA.

Содержание P9370A







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды