Keysight Technologies Startup Guide 1-15
Getting Started
STEP 4. Install the P937xA Network Analyzers
Figure 1-7
Assemble rear latches and screws (0515-0664 screws (x8) and P9375-20018
rear latches (x2)
6.
Install a semi-rigid cable (P9375-20014), seen in
Figure 1-8
, between the
Trig Out port and the Trig In port on each of the P937xA pairs (1 & 2).
7.
Install a semi-rigid cable (P9375-20015), seen in
Figure 1-8
, between the
Ref In port and the Ref Out port on each of the P937xA pairs (1 & 2).
8.
Tighten the semi-rigid cables using the socket adapter, seen in
Figure 1-5
on page 13
, attached to an 8 lbf-in (0.91 N.m) torque driver.
9.
Install a semi-rigid cable (P9375-20013), seen in
Figure 1-8
, between the
LO In port and the LO Out port on each of the P937xA pairs (1 & 2).
