20
N7026A 150 MHz AC/DC High Sensitivity Current Probes User’s Guide
N7026A Probe
Figure 3
N7026A probe auto-recognized on an Infiniium oscilloscope on connection
3
If you want to measure larger currents, connect the probe to an external power supply. Plug
the external power adapter shipped with the probe into the external power supply socket on
the probe’s output connector.
NOTE
Immediately after powering on, this probe may be subject to an appreciable offset drift
due to the effect of self-heating. To counteract this, allow the probe to warm up for
about 30 minutes before carrying out measurements.
