3-1
Keysight Measurement Receiver
PNA-X
Service Guide
3
Tests and Adjustments
Information in This Chapter
This chapter contains procedures to help you check, verify, and adjust your
PNA.
— The checks verify the operation of the assemblies in your analyzer.
— The verification compares the operation of your analyzer to a gold standard.
— The adjustments allow you to tune your analyzer for maximum response.
Conventions Used for Hardkeys, Softkeys, and Menu Items
The following conventions are used in this document:
Chapter Three at-a-Glance
This represents a “hardkey”, a key that is physically located on the instrument.
This represents a “softkey”, a key whose label is determined by the instrument
firmware.
Menu Item
This represents an item in a drop-down or pop-up menu.
Section Title
Summary of Content
Start Page
Items to consider or procedures to perform before testing is begun:
—
Verify the Operating Environment
—
Protect Against Electrostatic Discharge (ESD)
—
A brief summary of each performance test:
—
Setups and procedures for adjusting your analyzer:
—
10 MHz Frequency Reference Adjustment
—
EE Default Adjustment (Option 108)
Hardkey
Softkey