Keysight N5264A Service Guide 2-7
General Product Information
Required Service Test Equipment
1 inch, open-end torque wrench
(metric equivalent is 26 mm)
8.1 N-m (72 in-lb) setting (for
Port 1 and Port 2 connector
nuts)
N/A
N/A
R
20 mm, open-end torque wrench
0.9 N-m (8 in-lb) setting (for
measurement port
connections)
8710-1764
N/A
P, A, T
Static Safety Parts
Adjustable antistatic wrist strap
N/A
9300-1367
None
P, A, T
Antistatic wrist strap grounding cord
(5 foot)
N/A
9300-0980
None
P, A, T
Static control table mat and earth
ground wire
N/A
9300-0797
None
P, A, T
Miscellaneous
USB flash ROM drive
N/A
Any
None
P, A, R
a. Unless specified otherwise, equipment listed is required for all measurement receiver options.
b. P = Performance tests, A = Adjustments, T = Troubleshooting, R = Repair, V = System verification
Equipment
a
Critical Specifications
Recommended
Model or Part
Number
Alternate
Model
Number
Use
b