Keysight N5247-60106 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 54

background image

Installation Note N5247-90106 15

Installation Procedure for the Upgrade

“Step 49. Position the Cables and Wires to Prevent Pinching.”
“Step 50. Reinstall the Inner Cover.”
“Step 51. Reinstall the Outer Cover.”
“Step 52. Install the Cable Guards Over the Front Panel Jumpers.”
“Step 53. Remove Option 219 License.”
“Step 54. Enable Options P04 (400) and 419.”
“Step 55. Perform Post-Upgrade Adjustments and Calibration.”

Step 1.Obtain a Keyword and Verify the Information

Follow the instructions on the Option Entitlement Certificate supplied to obtain

a license key for installation of this upgrade. Refer to

Redemption” on page 5

Verify that the model number, serial number, and option number information

on the license key match those of the instrument on which this upgrade will be

installed.
If the model number, serial number, or option number do not match those on

your license key, you will not be able to install the option. If this is the case,

contact Keysight for assistance before beginning the installation of this

upgrade. Refer to

“Contacting Keysight” on page 4

Once the license key has been received and the information verified, you can

proceed with the installation at step 2.

Step 2. Remove the Outer Cover

For instructions, click the Chapter 7 bookmark “Removing the Covers” in the

PDF Service Guide.

Step 3.Remove the Inner Cover

For instructions, click the Chapter 7 bookmark “Removing the Covers” in the
PDF Service Guide

Step 4. Remove the Front Panel Jumper Cables and Cable Guards

1. Pull the two cable guards off of the front panel jumper cables. Save them

for reinstallation later.

2. Remove all front panel jumper cables. Keep for reinstallation later.

Step 5. Remove the Front Panel Assembly

For instructions, click the Chapter 7 bookmark “Removing and Replacing the

Front Panel Assembly” in the PDF Service Guide1.

«
...
13
14
15
16
17
...
»

Содержание N5247-60106























































Отзывы:

Нет отзывов

Похожие инструкции для N5247-60106

Бренд: Bamo Страницы: 8

ProcessMaster FEP630 series

Бренд: ABB Страницы: 92

Бренд: National Instruments Страницы: 15

Бренд: EUPRY Страницы: 6

Бренд: REED Страницы: 4

Бренд: RIDGID Страницы: 18

Бренд: Bontempi Страницы: 18

Бренд: ESP Страницы: 12

Бренд: Hanna Instruments Страницы: 12

Бренд: Omega Страницы: 4

Бренд: Chauvin Arnoux Страницы: 44

Бренд: Droplet Страницы: 35

Бренд: Sencore Страницы: 75

Бренд: truflo Страницы: 33

Бренд: Oakton Страницы: 26

UNITY INOVA NMR

Бренд: Varian Страницы: 65

Бренд: Xsens Страницы: 12

Бренд: Oldham Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды