manualshive.com logo in svg

Keysight N5244/45AS Option H85, Руководство пользователя и сервисное руководство

Поделиться
Скачать
Keysight N5244/45AS Option H85 Скачать руководство пользователя страница 46

 42

N5245-90002 User’s and Service Guide

N5244/45AS Option H85

Regulatory Information

Regulatory Information

This section contains information that is required by various government regulatory agencies.

Instrument Markings

The instruction documentation symbol. The product is marked with this symbol when it is necessary for 
the user to refer to the instructions in the documentation.

The AC symbol indicates the required nature of the line module input power.

This symbol indicates separate collection for electrical and electronic equipment, mandated under EU 
law as of August 13, 2005. All electric and electronic equipment are required to be separated from 
normal waste for disposal (Reference WEEE Directive, 2002/96/EC).   

This symbol indicates that the power line switch is ON.

This symbol indicates that the power line switch is in the STANDBY position.

This symbol indicates that the power line switch is in the OFF position.

This symbol is used to identify a terminal which is internally connected to the product frame or chassis.

The CE mark is a registered trademark of the European Community. (If accompanied by a year, it is 
when the design was proven.)

The CSA mark is a registered trademark of the CSA International. 

This mark designates the product is an Industrial Scientific and Medical Group 1 Class A product 
(reference CISPR 11, Clause 5)

This is a marking to indicate product compliance with the Canadian Interference-Causing Equipment 
Standard (ICES-001).

Direct Current.

IP 2 0

The instrument has been designed to meet the requirements of IP 2 0 for egress and operational 
environment.

The RCM mark is a registered trademark of the Australian Communications and Media Authority

Indicates the time period during which no hazardous or toxic substance elements are expected to leak 
or deteriorate during normal use. Forty years is the expected useful life of the product. 

This symbol on all primary and secondary packaging indicates compliance to China standard GB 
18455-2001.

 

South Korean Certification (KC) mark; includes the marking's identifier code which follows the format: 
MSIP-REM-YYY-ZZZZZZZZZZZZZZ.

ICES/NMB-001 

Содержание N5244/45AS Option H85



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды