Keysight N5244/45AS Option H85 Скачать руководство пользователя страница 43

Страница: 43 / 50

N5245-90002 User’s and Service Guide

N5244/45AS Option H85

Safety and Information

Safety and Information

Introduction

Review this product and related documentation to familiarize yourself with safety markings and

instructions before you operate the instrument.
This product has been designed and tested in accordance with accepted industry standards,

and has been supplied in a safe condition. The documentation contains information and

warnings that must be followed by the user to ensure safe operation and to maintain the

product in a safe condition.

Safety Earth Ground

WARNING

This is a Safety Class I Product (provided with a protective earthing ground

incorporated in the power cord). The mains plug shall be only be inserted in a

socket outlet provided with a protective earth contact. Any interruption of the

protective conductor inside or outside of the product is likely to make the

product dangerous. Intentional interruption is prohibited.

CAUTION

Always use the three prong AC power cord supplied with this product. Failure to

ensure adequate earth grounding by not using this cord may cause product
damage and the risk of electrical shock.

Declaration of Conformity

A copy of the Declaration of Conformity is available upon request, or a copy is available on the

Keysight Technologies web site at

http://regulations.corporate.keysight.com/DoC/search.htm

Statement of Compliance

This product has been designed and tested in accordance with accepted industry standards,

and has been supplied in a safe condition. The documentation contains information and

warnings that must be followed by the user to ensure safe operation and to maintain the

product in a safe condition.

Содержание N5244/45AS Option H85



















































Результаты поиска

Содержание N5244/45AS Option H85

Отзывы:

Бренды по названию

Популярные бренды

Keysight N5244/45AS Option H85, Руководство пользователя и сервисное руководство

Результаты поиска

Содержание N5244/45AS Option H85

Отзывы:

Бренды по названию

Популярные бренды