56 Installation Note N5227-90118
Installation Procedure for the Upgrade
-
Step 21. Install the Other End of the Bias-Tee Combiner Cables to the
Source Synthesizer and LO Synthesizer Board Gray Cables
Refer to
and
. New parts are listed
1.
The analyzer should be positioned on its left side (fans facing upwards) as
shown.
2.
Then choose from the following:
— Version 6 Synthesizers:
Connect flexible cable N5245-60027 (item
), N5242-60079 (item
), and N5242-60080 (item
) as
indicated in
.
— Version 7 Synthesizers:
Connect flexible cable N5245-60112 (item
), N5240-60114 (item
), and N5240-60113 (item
) as
indicated in
.
This upgrade kit contains cables for Version 6 synthesizers and Version 7
direct digital synthesizer (DDS) assemblies. Please refer to your
instrument’s Service Guide, if you are unclear which assembly you have
installed. Refer to