6
N2795/6A User’s Guide
1
Using the Probes
N2796A 2 GHz probe can also be used with Keysight’s 2.5 GHz or
higher bandwidth Infiniium scope as a low cost alternative to the
InfiniiMax probes.
The N2795/6A probes are powered directly by the InfiniiVision and
Infiniium AutoProbe interface, eliminating the need for an
additional power supply. The probes also come with a number of
accessories that allow for easy connections to the circuit under
test. Refer to
WARNING
Handle the probe with care to avoid injury, especially when it is fitted with
the sharp spring or rigid tip.
CAUTION
This probe is an ESD sensitive devices, particularly at the probe tips. Follow
standard ESD precautions when handling. Remove tip accessories when
storing the probe.
CAUTION
Before using the probe, refer to
CAUTION
Handle the probe cable carefully to avoid damaging it through excessive
bending or pulling. Avoid any mechanical shocks to the probe in order to
guarantee accurate performance and protection.
Cleaning the Probe
Disconnect the probe from the oscilloscope and clean the probe
with a soft cloth dampened with a mild soap and water solution.
Make sure the probe is completely dry before reconnecting it to an
oscilloscope.
Содержание N2795/6A
