Keysight M9217A PXIe 2-CH, Руководство для стартапов

Страница: 22 / 36

Keysight M9217A Startup Guide 22
Step 4: Install the Module
1 Ensure that the chassis power switch is at the Off (Standby) position before you unplug
the PXIe chassis.
2 If the chassis has multiple fan speed settings, ensure that the fans are set to automatic.
Do not set the fan speed to low or turn it off.
3 Position the chassis so that there is ample space between the chassis fan intake and
exhaust vents. Blockage by walls or obstructions affects the air flow needed for cooling.
(Refer to the chassis documentation for more information about cooling).
4 If you are using an embedded controller, proceed to step 5 . If you using a remote
controller, skip to step 6 .
CAUTION
– The PXIe hardware does not support “hot-swapping” capabilities (changing modules
while power is applied to the chassis).
– Before installing the M9217A into the chassis, ensure that the chassis is powered off
and unplugged to prevent damage to the module.
NOTE
The M9217A module can be used in a chassis with a PXIe or PXI-H chassis peripheral slot.
The module can be installed in any PXIe slot marked with a peripheral slot compatibility image (a solid circle containing the
slot number).
The module can also be installed in any hybrid PXI slot marked with a peripheral slot compatibility image (the letter “H” and
a solid circle containing the slot number).