Keysight M9164A, Руководство по запуску и обслуживанию

Страница: 21 / 35

Getting Started 1
Keysight M9164x and M9165x Startup and Service Guide 21
Step 3: Install the M9164x/M9165x Module
1 Ensure that the PXI chassis power switch is in the Off (Standby) position; then
unplug the chassis.
2 If the chassis has multiple fan speed settings, ensure that the fans are set to
automatic. Do not set the fan speed to low or turn it off.
3 Position the chassis so that there is ample space between the chassis fan
intake and exhaust vents. Blockage by walls or obstructions affects the air flow
needed for cooling. (Refer to the chassis documentation for more information
about cooling).
4 Holding the module by the injector/ejector handle, slide it into an available PXI
(or hybrid) slot as shown in the figure below.
– Install the module into the PXI slot of the chassis by placing the module
card edges into the front module guides (top and bottom).
NOTE
The module can be used in a chassis with a cPCI, PXI-1, or PXI-H chassis
peripheral slot.
The module can be installed in any standard PXI slot marked with a peripheral slot
compatibility image (a circle containing the slot number).
The module can also be installed in any hybrid PXI slot marked with a peripheral slot
compatibility image (the letter "H" and a solid circle containing the slot number).
CAUTION
PXI hardware does not support "hot-swap" capabilities (changing modules
while power is applied to the chassis).
Before installing a module into the chassis, the chassis must be powered off
and unplugged to prevent damage to the module.