Keysight M9164A, Руководство по запуску и обслуживанию

Страница: 17 / 35

Getting Started 1
Keysight M9164x and M9165x Startup and Service Guide 17
Step 1: Unpack and Inspect the M9164x/M9165x Module
ESD
Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
Two types of ESD protection are listed below. Purchase acceptable ESD
accessories from your local supplier.
– Conductive table-mat and wrist-strap combination
– Conductive floor-mat and heel-strap combination
Both types, when used together, provide a significant level of ESD protection. Of
the two, only the table-mat and wrist-strap combination provides adequate ESD
protection when used alone. To ensure user safety, static-safe accessories must
provide at least 1 M Ω of isolation from ground.
Inspect for Damage
After unpacking the module, carefully inspect the module for any shipping
damage. Report any damage to the shipping agent immediately, as such damage
is not covered by the warranty (warranty information can be found at the
beginning of this manual).
CAUTION
The module is shipped in material that prevents static damage to the
module. The module should only be removed from the packaging in an
anti-static area ensuring that correct anti-static precautions are taken. Store
the module in an anti-static envelope when not in use.
WARNING
These techniques for a static-safe work station should not be used when
working on circuitry with a voltage potential greater than 500 volts.
CAUTION
To avoid damage when handling a module, do not touch the exposed
connector pins.