Keysight M9130A, Руководство для стартапов

Страница: 11 / 50

Keysight PXI General Purpose Switch Modules Startup Guide 10
Step 1: Unpack and Inspect the Module
Inspect for damage
After unpacking the switch module, carefully inspect it for any shipping damage.
Report any damage to the shipping agent immediately, as such damage is not
covered by the warranty.
Return the module for service
Should it become necessary to return a Keysight switch module for repair or
service, follow the steps below:
1 Review the warranty information shipped with your product.
2 Contact Keysight to obtain a return authorization and return address. If you
need assistance finding Keysight contact information go to
www.keysight.com/find/assist (worldwide contact information for repair and
service) or refer to the Support information on the product web page at:
www.keysight.com/find/pxiswitch .
3 Write the following information on a tag and attach it to the malfunctioning
equipment.
– Name and address of owner. A Post Office box is not acceptable as a return
address.
– Product model number (for example, M9135A)
– Product serial number (for example, MYXXXXXXXX). The serial number
label is located on the side of the module.
– A description of failure or service required.
4 Carefully pack the module in its original ESD bag and carton. If the original
carton is not available, use bubble wrap or packing peanuts, place the
instrument in a sealed container and mark the container “FRAGILE”.
5 On the shipping label, write ATTENTION REPAIR DEPARTMENT and the
service order number (if known).
To avoid damage when handling a module; do not touch exposed
connector pins.
If any correspondence is required, refer to the product by serial
number and model number.