Keysight M9130A, Руководство для стартапов

Страница: 10 / 50

9 Keysight PXI General Purpose Switch Modules Startup Guide
Step 1: Unpack and Inspect the Module
Related documentation
This Startup Guide, and the documentation listed below, are on the Switch
Module Software and Product Information CD.
- Help file for the PXI Switch Modules Soft Front Panel
- Help file for the PXI Switch Modules IVI-C/IVI-COM device drivers
- Help file for the PXI Switch Modules LabVIEW G device drivers
- Keysight PXI General Purpose Switch Modules Data Sheet. For the latest
specifications, check the Keysight web site at:
www.keysight.com/find/pxiswitch .
Step 1: Unpack and Inspect the Module
ESD
Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
The following figure shows an example of a static-safe work station using two
types of ESD protection. Purchase acceptable ESD accessories from your local
supplier.
- Conductive table-mat and wrist-strap combination.
- Conductive floor-mat and heel-strap combination.
Both types, when used together,
provide a significant level of ESD
protection. Of the two, only the
table-mat and wrist-strap
combination provides adequate ESD
protection when used alone. To
ensure user safety, the static-safe
accessories must provide at least 1
M  of isolation from ground.
Keysight’s PXI Switch Modules are shipped in materials that
prevent static electricity damage. The modules should only be
removed from the packaging in an anti-static area ensuring that
correct anti-static precautions are taken. Store all modules in
anti-static envelopes when not in use.