Keysight DCA-X Series, Быстрый старт

Страница: 46 / 48

5 Contacting Keysight
2. Cover all front or rear-panel connectors that were originally covered when
you first received the instrument.
Cover electrical connectors to protect sensitive components from
electrostatic damage. Cover optical connectors to protect them from
damage due to physical contact or dust.
Instrument damage can result from using packaging materials other than
the original materials. Never use styrene pellets as packaging material. They
do not adequately cushion the instrument or prevent it from shifting in the
carton. They may also cause instrument damage by generating static
electricity.
3. Pack the instrument in the original shipping containers. Original materials
are available through any Keysight Technologies office. Or, use the following
guidelines:
n
Wrap the instrument in anti-static plastic to reduce the possibility of
damage caused by electrostatic discharge.
n
For instruments weighing less than 54 kg (120 lb), use a double-walled,
corrugated cardboard carton of 159 kg (350 lb) test strength.
n
The carton must be large enough to allow approximately 7 cm (3 inches)
on all sides of the instrument for packing material, and strong enough to
accommodate the weight of the instrument.
n
Surround the equipment with approximately 7 cm (3 inches) of packing
material, to protect the instrument and prevent it from moving in the car-
ton. If packing foam is not available, the best alternative is S.D-240 Air
Cap from Sealed Air Corporation (Commerce, California 90001). Air Cap
looks like a plastic sheet filled with air bubbles. Use the pink (antistatic)
Air Cap to reduce static electricity. Wrapping the instrument several
times in this material will protect the instrument and prevent it from mov-
ing in the carton.
4. Seal the carton with strong nylon adhesive tape.
5. Mark the carton "FRAGILE, HANDLE WITH CARE".
6. Retain copies of all shipping papers.
N1000A Quick Start Guide 46