Keysight DCA-X Series, Быстрый старт

Страница: 29 / 48

2 Installing the N1000A
Figure 12. FlexDCA Application in Oscilloscope Mode
Avoid touching the screen with a sharp object, as this could result in damage to
the display. Instead, use your finger.
To ensure proper operation of the N1000A, open the instrument’s help system.
Click under Safety, click Introduction and, in the displayed topic, click the
Windows OS tab. This topic includes information on settings that you should
avoid changing.
The front-panel ON/Standby switch places the instrument in standby. The
instrument is still energized.
When you press the ON/Standby switch to place the instrument in standby
mode, there is a small time delay before you’ll see a change on the instrument.
This is normal and does not indicate a problem.
User Accounts
Windows is configured with the following two user accounts: dca-admin and
dca-service. The dca-service account is the only account that is password
protected and is only provided for factor technicians. This account is not
customer accessible.
N1000A Quick Start Guide 29