4-6 Keysight R, Q, U, V, and W11644A
Use, Maintenance, and Care of the Devices
Connections
4-
Figure 4-3
Inserting Slip Pins
2.
Using the pins as guides, carefully align the flanges and insert two screws
in the diagonal corner holes, as shown in
.
Figure 4-4
Aligning Flanges
3.
Place a lock washer and nut on each screw, and finger tighten.
4.
Insert the remaining two screws.
5.
Place a lock washer and nut on each screw, and finger tighten.
6.
Remove the slip pins.
7.
Go to
“Tightening a Flange Connection” on page 4-7
.
Aligning a Precision and a Non-Precision Flange
1.
Place an alignment pin (with head) in the corner hole of one flange. Place
a second alignment pin in the diagonal corner hole of the second flange.
See
Содержание 11644A Q
