Keysight 1143A, Руководство пользователя и сервисное руководство

Страница: 35 / 56

Replaceable Parts
This section contains information for ordering parts. Service support for the
1143A Probe Offset Control and Power Module is to the component level.
Parts Lists
Table 6, page 37, is an instrument-level parts list. Table 7, page 38, is a parts
list for the PC assembly (A1) in the power module. The information given for
each part consists of the following:
•
Reference designator.
•
Agilent Technologiespart number.
•
Part number Check Digit (CD).
•
Total quantity (Qty) in instrument or on assembly. The total quantity is
given once and at the first appearance of the part number in the list.
•
Description of the part.
•
Typical manufacturer of part in an identifying five-digit code.
•
Manufacturer’s part number.
Manufacturers’ Codes
A list of manufacturers’ codes is given in table 8, page 42. The codes are
given for parts in the parts lists. The table gives the manufacturer and
address for each code.
Component Locator
A component locator for the power and control assembly A1 is shown in
figure 6, page 43. Table 9, page 42, references the parts on the assembly to a
grid location on the drawing.
Ordering Information
To order a part in the material list, quote the Agilent Technologies part
number, indicate the quantity desired, and address the order to the nearest
Agilent Technologies sales office.
To order a part not listed in the material list, include the instrument part
number, instrument serial number, a description of the part (including its
function) and the number of parts required. Address the order to the nearest
Agilent Technologies Service Center.
Service
Troubleshooting and Repair
35