Keysight Technologies VXI bus 75000 C Series, Руководство по обслуживанию

Страница: 26 / 130

26 Keysight E1406A Command Module Service Guide
Verification Tests Command Module Self-Tests
Example Program
This program performs an GPIB power-on test for the Keysight E1406A
command module and uses the SYST:ERR? command to check results. If the
power-on test passes, +0,"No error" is returned. If the power-on test fails, the
test returns an error message for each error detected. In this case, see Chapter 5
- Error Messages for an explanation of the error(s)
1!Test S-1: GPIB Power-On Self-Test
2!
10CLEAR SCREEN
20 ASSIGN @Addr to 70900
Figure 2-4 Test S-1: GPIB Power-On Test
If the Ready light does not turn on and/or the Failed/SYSFAIL
lights stay lit when power is turned ON, there is a very high
probability that the command module is defective. In this case,
this test will probably not run, and you should see Chapter 4 -
Service for repair/replacement guidelines.