Keysight Technologies VXI bus 75000 C Series, Руководство по обслуживанию

Страница: 19 / 130

Keysight E1406A Command Module
Service Guide
19
2 Verification Tests
Introduction
This chapter describes Keysight E1406A Command Module self-tests and
functional verification tests. There are no operation verification tests,
performance verification tests, or user adjustments for the command module.
Table 2-1 defines command module self-tests and functional verification tests
and suggests when to use each type of test.
The test administrator must know command module and test equipment
operation. It is assumed that a qualified, service-trained person will connect
cables and adapters required. See Table 1-4, Keysight E1406A Command
Module Recommended Test Equipment, for test equipment requirements.
Do not perform any of the verification tests in this chapter
unless you are a qualified, service-trained person and have
read the WARNINGS and CAUTIONS in Chapter 1.
Table 2-1
Keysight E1406A Command Module Test Definitions
Title Description When to Use:
Self-Tests Use power-on self-tests to verify that the
command module is operational and is
communicating with the computer. When you want to verify
operation and/or
communication.
Functional
Verification
Tests Gives a high probability that the command
module is functional. These tests provide a
PASS/FAIL result. At incoming inspection, after
module repair, or whenever
faulty operation is suspected.