Installation Note N9040-90027
3
Option FT1 and FT2 - Frequency Mask Trigger Installation Kit
Option FT1 and FT2 - Frequency Mask Trigger Installation Kit
Introduction
This kit contains the instructions to install either Option FT1 or Option FT2 on a Keysight UXA
Signal Analyzer. FT1 or FT2 is supported by the N9067C Pulse application and the 89600 VSA
application.
Products Affected:
N9040B UXA Signal Analyzer
N9041B UXA Signal Analyzer
Serial Numbers:
All
To Be Performed By:
(X) Keysight Service Center
(X) Personnel Qualified by Keysight
(X) Customer
Estimated Installation Time:
Estimated Adjustment and Verification Time:
0.5 Hours
0. Hours
1.
The signal analyzer being upgraded must have one of the wide
bandwidth options listed below already installed. To verify that one of
these options is present, press
System
,
Show System
, and look under
"Options" for the presence of the options listed.
—
Must have N9040B-B2X, or N9040B-B5X, or N9041B-H1G
2.
This option is licensed for one instrument model/serial number
combination. The license key will only install on the designated
instrument.
