manualshive.com logo in svg

Keysight Technologies N8241A, Руководство пользователя

Поделиться
Скачать
Keysight Technologies N8241A Скачать руководство пользователя страница 7

6

 

 

Trademark Acknowledgement

Microsoft

 

is a US registered trademark of Microsoft Corp.

MATLAB

 is a U.S. registered trademark of The Math Works, Inc.

Updated Information

Where to Find the Latest Information

Documentation is updated periodically. For the latest information about the N8241A 
Arbitrary Waveform Generator, including firmware upgrades and application 
information, please visit the following Internet URL:

http://www.agilent.com/find/synthetic

Compliance

This product has been designed and tested in accordance with accepted industry 
standards, and has been supplied in a safe condition. The documentation contains 
information and warnings that must be followed by the user to ensure safe operation 
and to maintain the product in a safe condition.

Declaration of Conformity 

The Declaration of Conformity (DOC) is on file. If a copy is required, please contact 
an Agilent Sales Representative or the closest Agilent Sales Office. Alternately, 
contact Agilent at: 

http://www.agilent.com/find/

Содержание N8241A






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды