manualshive.com logo in svg

Keysight Technologies N8241A, Руководство пользователя

Поделиться
Скачать
Keysight Technologies N8241A Скачать руководство пользователя страница 3

2

 

 

Notices

Warranty

The material contained in this document is provided “as is,” and is subject to being 
changed, without notice, in future editions. Further, to the maximum extent permitted 
by applicable law, Agilent disclaims all warranties, either express or implied, with 
regard to this manual and any information contained herein, including but not limited 
to the implied warranties of merchantability and fitness for a particular purpose. 
Agilent shall not be liable for errors or for incidental or consequential damages in 
connection with the furnishing, use, or performance of this document or of any 
information contained herein. Should Agilent and the user have a separate written 
agreement with warranty terms covering the material in this document that conflict 
with these terms, the warranty terms in the separate agreement shall control.

Technology Licenses

The hardware and/or software described in this document are furnished under a 
license and may be used or copied only in accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a U.S. Government prime contract or 
subcontract, Software is delivered and licensed as “Commercial computer software” 
as defined in DFAR 252.227-7014 (June 1995), or as a “commercial item” as 
defined in FAR 2.101(a) or as “Restricted computer software” as defined in FAR 
52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, 
duplication or disclosure of Software is subject to Agilent Technologies’ standard 
commercial license terms, and non-DOD Departments and Agencies of the U.S. 
Government will receive no greater than Restricted Rights as defined in FAR 
52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than 
Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 

Содержание N8241A






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды