Page 34
Find us at
www.keysight.com
For devices with 7 mm connectors
Mechanical calibration kits
85050B standard: DC to 18 GHz. Includes:
– 00909-60008 7 mm coax termination
– 85050-60006 7 mm fixed broadband load
– 85050-80007 7 mm short
– 85050-80010 7 mm open
– 85050-80011 7 mm sliding load
85050C precision TRL: DC to 18 GHz. Includes:
– 00909-60008 7 mm coax termination
– 85050-60003 7 mm to 7 mm airline
– 85050-60005 7 mm to 7 mm TRL adapter
– 85050-60006 7 mm fixed broadband load
– 85050-80008 7 mm short
– 85050-80009 7 mm short collet
– 85050-80010 7 mm open
85050D economy: DC to 18 GHz. Includes:
– 85050-60006 7 mm fixed broadband load
– 85050-80007 7 mm short
– 85050-80010 7 mm open
Electronic calibration kits
– N4696B Microwave ECal: 300 kHz to 18 GHz, 2-ports,
7 mm to 7 mm Microwave module
Cables
1
– 85132E single, flexible: 3.5 mm (f) to 7 mm, 97.2 cm,
38.25 inches
2
– 85132F set, flexible: two 3.5 mm (f) to 7 mm cables, 62.9 cm
each, 24.75 inches each
2
, p/n 85132-60004
– 85133F cable set (set, flexible, 2.4 mm, 53 cm each, 21 inches
each)
– 85134F cable set (set, flexible, 2.4 mm (f) to 3.5 mm (f) and
(m), 53 cm each, 21 inches each)
– 85135E single, flexible: 2.4 mm (f) to 7 mm, 96 cm, 38 inches
– 85135F set, flexible: two 2.4 mm (f) to 7 mm cables, 53 cm
each, 21 inches each, p/n 85135-60002
Adapter sets
– 85130E 2 4 mm
1
to 7 mm
– R281A adapter (2.4 mm (f) to WR-28 waveguide adapter)
– R281B adapter (2.4 mm (m) to WR-28 waveguide adapter)
– Q281A adapter (2.4 mm (f) to WR-22 waveguide adapter)
– Q281B adapter (2.4 mm (m) to WR-22 waveguide adapter)
For devices with waveguide
Mechanical calibration kits
X Band
X11644A standard, WR-90: 8.2 to 12.4 GHz. Includes:
– 00896-60008 X-band standard section
– 00910-60003 X-band termination
– 11644-20018 X-band short
– 11644-20021 X-band shim
– X281C adapter (included in calibration kit): WR-90 to 7 mm
P Band
P11644A standard, WR-62: 12.4 to 18 GHz. Includes:
– 00896-60007 P-band standard section
– 00910-60002 P-band termination
– 11644-20017 P-band short
– 11644-20020 P-band shim
– P281C adapter (included in calibration kit): WR-62 to 7 mm
K Band
K11644A standard, WR-42: 18 to 26.5 GHz. Includes:
– 00896-60006 K-band standard section
– 00910-60001 K-band termination
– 11644-20016 K-band short
– 11644-20019 K-band shim
– K281C adapter (included in calibration kit): WR-42 to 3.5 mm
(f) Option 012 WR-42 to 3.5 mm (m)
R Band
R11644A standard, WR-28: 26.5 to 40 GHz. Includes:
– 00914-20028 R-band termination
– 11644-20005 R-band short
– 11644-20003 R-band shim
– 11644-60001 R-band 10 cm straight waveguide
– 11644-60016 R-band 5 cm straight waveguide
Q Band
Q11644A standard, WR-22: 33 to 50 GHz. Includes:
– 11644-60005 Q-band termination
– 11644-20004 Q-band short
– 11644-20001 Q-band shim
– 11644-60002 Q-band 10 cm straight waveguide
– 11644-60017 Q-band 5 cm straight waveguide
U Band
U11644A standard, WR-19: 40 to 60 GHz. Includes:
– 11644-60006 U-band termination
– 11644-20004 U-band short
– 11644-20002 U-band shim
– 11644-60003 U-band 10 cm straight waveguide
– 11644-60018 U-band 5 cm straight waveguide
1 For use with E8362C.
2 Special rugged female connector specifically for connecting to the
network analyzer test port, but does not mate with a standard male
connector.