Keysight Technologies N5221A Скачать руководство пользователя страница 22

Страница: 22 / 36

Page 22

Find us at

www.keysight.com

PNA Family Network Analyzer Upgrade Kits

(continued)

Application options

Upgrade kits are available to add options after initial purchase. To upgrade the PNA-X/PNA/PNA-L, order the corresponding
item number. The model and serial numbers of the instrument to be retrofitted are required as part of the order.

1 For measuring frequency converters, Option 082 or 083 is required.

2 Requires configurable test set for signal conditioning of noise figure measurements using standard receivers. Therefore it is not available with N522xA-200, -210,

-400 and -410.

3 Upgrading N5244A units with noise figure hardware requires serial-number prefixes of 5204 or higher, and upgrading N5245A units requires serial-number prefixes of

5205 or higher. For these two models, units with lower serial-number prefixes can be traded in for credit towards a new unit with the noise figure hardware.

4    Two-tone signal must be routed to R1 receiver after an external combiner; therefore it is not available with N522xA-200, -210, -400 and -410.
5    When used with an external signal generator, configurable test set is required to access a receiver. Therefore it is not available with N522xA-200 and -210.
6    To connect a multiport test set, configurable test set is required. Therefore it is not available with N522xA-200, -210, -400, -410, and N523xA-200, and -400.
7    The Windows 7 upgrade kit for PNAs containing CPU version 6 is model N8983A. This upgrade kit contains a new solid state drive with all of the necessary software

installed. For units with older CPUs, order the N8984A with Option PC7. This upgrade kit contains a new solid state drive and a version 7 CPU. For adding Option 090
to units with DSP version 4, add Option SP5 to the N8983A or N8984A order to get the DSP version 5.

8 A configurable test set is required for VMC measurements (to connect a reference mixer) or for SMC+Phase measurements using the comb-generator-based calibration.

When ordered with N522xA-200, -210, -400 and -410, Option 083 adds phase and delay measurements only by using SMC+Phase with a calibration mixer.

9    Optional receiver attenuators are recommended to avoid receiver compression for large-signal measurements.
10.  Option 093 is a subset of Option 094; therefore they cannot be ordered together.
11.  Some parameters are is restricted to 50 GHz.

Description

Required Option

For PNA-X

Series

For PNA

Series

For PNA-L

Series

User

Installable

Measurement applications

Automatic fixture removal

Windows 7 OS

N524xAU-007

N522xAU-007

N523xAU-007 Yes

Time-domain measurements

N524xAU-010

N522xAU-010

N523xAU-010 Yes

Noise figure measurements using standard receivers

Option 080

1,2

N524xAU-028

N522xAU-028

n/a

Yes

Fully-corrected noise figure measurements

for PNA-X, 2-ports

Option 080 and for N5241/42/49A, one of Op-

tions 219, 224 or H85

For N5244/45/47A, 080 and 224

N524xAU-924

n/a

Fully-corrected noise figure measurements

for PNA-X, 4-ports

Option 080 and for N5241/42/49A, one of Op-

tions 419, 423 or H85

For N5244/45/47A, 080 and 423

N524xAU-929

n/a

Frequency offset

N524xAU-080

N522xAU-080

N523xAU-080 Yes

Scalar-calibrated converter measurements

Option 080

N524xAU-082

N522xAU-082

N523xAU-082 Yes

Vector- and scalar-calibrated converter measurements

Option 080

N524xAU-083

N522xAU-083

n/a

Yes

Embedded LO measurements

Option 082 or 083

N524xAU-084

N522xAU-084

n/a

Yes

Gain compression application

See Footnote 1

N524xAU-086

N522xAU-086

n/a

Yes

Intermodulation distortion application

Option 080

1,4

N524xAU-087

N522xAU-087

n/a

Yes

Source phase control

See Footnote 5

N524xAU-088

N522xAU-088

n/a

Yes

Differential and I/Q devices application

Option 080 and 400, 401, 410, 417, or 419, and

Windows 7 OS

N524xAU-089

N522xAU-089

n/a

Yes

Spectrum analyzer

Option 080, Windows 7 OS, and

DSP version 5

7, 9

N524xAU-090 N522xAU-090

523xAU-090

Yes

Extended spectrum analyzer to 110 GHz

Option 090. Not available with N5241/49A or

N5221A

N524xAU-093

N522xAU-093

n/a

Yes

Extended spectrum analyzer above 110 GHz

Option 090. Not available with N5241/49A or

N5221A

N524xAU-094

N522xAU-094

n/a

Yes

Active hot parameters (export-controlled version)

Option 080 and 400, 400/419, or 400/419/423

N524xAU-110

n/a

Yes

Active hot parameters

Option 080 and 400, 400/419, or 400/419/423

N524xAU-111

n/a

Yes

Integrated true-mode stimulus application

Option 400, 401, 417, 419, or 423

N524xAU-460

N522xAU-460

n/a

Yes

N-port capabilities

See Footnote 6

N524xAU-551

N522xAU-551

N523xAU-551 Yes

Содержание N5221A





































Результаты поиска

Содержание N5221A

Отзывы:

Похожие инструкции для N5221A

Бренды по названию

Популярные бренды

Keysight Technologies N5221A, Руководство по настройке

Результаты поиска

Содержание N5221A

Отзывы:

Похожие инструкции для N5221A

Бренды по названию

Популярные бренды