Keysight Technologies N2750A Скачать руководство пользователя страница 27

Страница: 27 / 76

Using the Probes

N2750/1/2A User’s Guide

Instrument Markings and Safety Symbols

Symbol

Description

STANDBY and AC symbols. The STANDBY marks the position of the instrument power

line switch.

The AC symbol is used to indicate the required nature of the line

module input power.

The CE mark is a registered trademark of the European Community. ISM GRP 1-A

denotes the instrument is an Industrial Scientific and Medical Group 1 Class A prod-

uct. ICES/NMB-001 indicates product compliance with the Canadian Interfer-

ence-Causing Equipment Standard.

The CSA mark is a registered trademark of the Canadian Standards Association.

The C-Tick mark is a registered trademark of the Australian Spectrum Management

Agency.

This product complies with the WEEE Directive (2002/96/EC) marking requirements.

The affixed label indicates that you must not discard this electrical/electronic prod-

uct in domestic household waste. Product Category: With reference to the equipment

types in the WEEE Directive Annex I, this product is classed as a “Monitoring and Con-

trol instrumentation” product. Do not dispose in domestic household. To return

unwanted products, contact your local Keysight office, or refer to www.keysight.com

for more information.

This symbol indicates the Environmental Protection Use Period (EPUP) for the prod-

uct’s toxic substances for the China RoHS requirements.

Recycle marking.

Содержание N2750A













































































Результаты поиска

Содержание N2750A

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies N2750A, Руководство пользователя

Результаты поиска

Содержание N2750A

Отзывы:

Бренды по названию

Популярные бренды