89600 VSA Software Configuration
M9710A Hardware Extension of 89600 VSA Software
9
Options and settings specific to high-speed digitizers
For specific acquisition modes, you may need to use high-speed digitizer specific
settings. These settings are available throught the digitizer hadware extension, and
can be managed from: Input > Extensions.
Calibration equalization: Enabling equalization improves the frequency
response and compensates for signal distortion. Four modes are available:
Off: No equalization(default)
Smooth roll off: minimizes the overshoot and ringing.
Sharp roll off: optimizes the frequency response flatness.
Custom: By default, Custom Equalization is equivalent to Equalization
Off.To Enable a custom equalization, please contact factory:
.
ControlIO1 signal: The digitizer supports multi-purposes IOs. This option allows
to select the signal used for the ControlIO1. For details about the possible sig-
nals, please refer to the User manual of your digitizer, section Multi-Purpose
Inputs and Outputs.
Enable external clock: See
Enable interleaving: See
Error on overrange: By default, if an overrange condition occurs on the ADC
inputs, the driver returns an error. Disabling this option disables the overrange
detection.
