89600 VSA Software Configuration
M9710A Hardware Extension of 89600 VSA Software
11
Configure extension parameters for specific acquisition
modes
Interleaved Mode
The option of combining two channels of the digitizer in interleaved mode is available
if your product has been ordered with the -INT option.
Interleaving allows to double the sampling rate with the trade-off of halving the
available center frequency range, as shown in the table below:
Model Option Mode
Center Frequency
Range
ADC Sampling
Rate
M9710A -SR4
Normal (non-inter-
leaved)
0 - 2.5 GHz
5 GS/s
-SR4
Interleaved
0 - 2.5 GHz
10 GS/s
For best measurement fidelity, you should ensure that the signal
center fre (analog bandwidth/2) does not cross the
Nyquist frequency.
