Measurement Setup Parameters
M9710A Hardware Extension of 89600 VSA Software
15
The analog bandwidth depends on the digitizer, the option (-Fxx) and interleaving
mode (see product datasheet for details).
Maximum span depends also on the digitizer sampling rate.
For details, please refer to
(http://rfmw.em.keysight.com/wireless/helpfiles/89600B/WebHelp/89600.htm)
.
ResBW:Standard VSA parameter. Can be configured by user.
Main Time Length: Standard VSA parameter. Can be configured by user.
Maximum value depends on the memory option of your module.
When using a M9710A with memory option -M80, note that the maximum
number of sample is limited to 2'147'483'647.
Center Frequency Range: The range depends on which model you are
using:
Model Option
Mode
Center Frequency Range
M9710A -SR4
Normal (non-interleaved)
0 - 2.5 GHz
Interleaved
0 - 2.5 GHz
Frequency Counter: Not available.
Trigger settings can be accessed via the Input > Trigger menu:
Trigger Type
Level
Default
External
-5 V to +5 V
2V
Channel
must be set within Offset ± FSR
-
The following trigger parameters are available:
Style: Free Run
1
, External, and Channel
Slope: available for External, and Channel
Level: available for External, and Channel
Delay: available for External, and Channel
Trigger Holdoff: not supported by the digitizer.
1
On Segmented Capture mode the free run triggered is not supported. (Segmented
Capture feature may be accessed via the MeasSetup > Time menu)
