Keysight Technologies M9537A, Руководство для стартапов

Страница: 21 / 36

Keysight M9537A AXIe Embedded Controller Startup Guide 13
Step 3: Install the M9537A Embedded Controller
LAN port recommendations
As a general rule, connect a network LAN cable to the ESM's LAN port and
connect LXI instruments to the M9537A's LAN ports. While other configurations
are viable, this configuration provides the fastest and most consistent reporting
in Keysight Connection Expert. Here are some pointers:
– The speed at which Keysight Connection Expert locates network
instruments depends on where you have connected the network and
instruments when the chassis and controller are first powered on. If
necessary, shut down the controller and chassis, and reboot.
– If you move a LAN cable while chassis power is applied, Connection Expert
may not find all of the instruments available on the network.
For example, if you connect the LAN cable to the ESM when power is first applied
to the chassis and subsequently you move the cable to one of the two LAN ports
on the controller (while the chassis is still powered on), Connection Expert may
only find the M9537A controller and AXIe modules installed in the chassis. To
recover, shut down the controller and the chassis, and reboot to restore
Connection Expert's ability to locate other network instruments.
– Connect external LAN-enabled instruments (LXI instruments) to the
M9537A controller LAN ports. This allows Keysight Connection Expert to
automatically find the instruments. These instruments have a local LAN IP
address or private network range.
– It is recommended that you add LXI instruments to the LAN that is
connected to the M9537A LAN ports. If instead, you have LXI instruments
on the ESM's LAN, Connection Expert may not automatically find them,
however, you may take the recovery action of adding the instrument
manually using Connection Expert's Add LAN Device feature.